Ethernet And Wifi At The Same Time
I want to use turn on both Ethernet and Wifi on my android decive at the same time with different IP addresses like: Wifi: IP: 192.168.1.5 Gateway: 192.168.1.1. Ethernet: IP:192.168.0.10 Gateway: (Blank) Is it possible? The problem is that when i turn Wifi on, the Ethernet will get disconnected.
The trick is to change the network card priority so that the wireless connection remains active when a wired connection is made.The first step is to get to the 'Control Panel Network and Internet Network and Sharing Center' page. On the left side of that page, click the link 'Change adapter settings'. This should bring you to the 'Control Panel Network and Internet Network Connections ' page.Select the wireless connection, right-click 'Properties', and provide an admin password (if necessary). This should bring you to a dialog box named wireless connect name Properties'.In the list box titled 'This connection uses the following items:', scroll down to 'Internet Protocol Version 4 (TCP/IPv4)' and select it.
Combine Wifi And Ethernet
The 'Properties' command button will enable; click it. This should bring you to a dialog box named 'Internet Protocol Version 4 (TCP/IPv4) Properties'.Click the 'Advanced' command button. This should bring you to a dialog box named 'Advanced TCP/IP Settings'.Near the bottom of the dialog box, there should be a check box named 'Automatic metric'. That will enable a text box named 'Interface metric'. Fill in a number. It needs to be larger than 1 (reserved for loopback) and the number you choose for the wired network (see below).Click three 'OK' command buttons to return to the 'Control Panel Network and Internet Network Connections ' page.Repeat the above for the wired connection:Select the wired connection, and right-click 'Properties' to get to the wired connection name Properties' dialog box.Select the IPv4 list entry and click 'Properties', and on the next dialog box click 'Advanced'.Again Uncheck 'Automatic metric', and fill in a number in the 'Interface metric' box. It needs to be larger than 1 but smaller than the number you chose above.I would assume that it's also possible to give the wired network higher priority than the wireless, but I didn't test that.Comment: Some other answers asked why one would want to do this.
It's not for improved throughput; I doubt that Windows could effectively divide traffic between two networks like that. Instead, it's so that the machine can be connected to two distinct networks. In my case, the wireless network goes to my ISP, and the wired network goes to my Network-Attached Storage server.Note: I found this general idea on a How-To Geek article titled '. The article has screen shots, but I've included a summary in case the link goes dead, and explained it somewhat differently.
Ethernet And Wifi At The Same Time Windows 7
Chances are, your laptop's wireless card has a 'disable on wired connect' feature configured as a default. In Windows 7 Control Panel, launch Network and Sharing Center. Click 'Change Adapter Settings'.
Right-click the wireless adapter you're using. Left-click 'Properties'. On the Networking tab of the Wireless Network Connection Properties window, click 'Configure'. That will display the properties window of the wireless card. Click the 'Advanced' tab and see if there's an option for 'Disable on wired connected' or similar language.
If there is, and it’s enabled, disable it. Some computers have a BIOS setting that determines this behavior.
You should bridge the connections. On the Windows 7, click on the Windows icon. Type view networkconnections and press Enter. Identify your Ethernet connection and your wireless connection.
The Ethernet connection is called Local Area Connectionand the wireless connection is called Wireless Network Connection. Click on Local Area Connection to select it. Press and hold the Ctrl key and click on Wireless Network Connection to select it.
Now you should have both connectionsselected. Right click on the selection and select Bridge Connections. There is no point to doing this since you will only be connecting twice to the same end router with the same WAN bandwidth. The fact you have 2 connections might increase redundancy but is pointless in a household environment.Secondly, Windows does not know how to manage 2 connections simultaneously. For example, to establish a connection to a website you must perform a 3-way handshake before data is transferred using packets which contain the destinations mac address.
Your router will send to the same interface which requested it because that's where the application layer (Windows) will expect the specific packet to arrive.
I want to use turn on both Ethernet and Wifi on my android decive at the same time with different IP addresses like:Wifi:IP: 192.168.1.5Gateway: 192.168.1.1andEthernet:IP:192.168.0.10Gateway: (Blank)Is it possible?the problem is that when i turn Wifi on, the Ethernet will get disconnected.and only when Wifi goes off or disconnected Ethernet will be connected!How can i use both of them at the same time connected to the network?It's possible in PC based systems even with 2-3 adapters!But what about Android devices?